On June 14th, a China Airlines Airbus A330-300 experienced the failure of several systems as it touched down at Taipei Songshan Airport. With the aircraft's primary flight computers, thrust reverser, and autobrake systems non-responsive, the crew applied manual braking, stopping just 10 meters before the end of the runway.

Details of the CI202 incident
The Airbus A330-300, registered as B-18302, was performing flight CI202 from Shanghai Pudong (China) to Taipei Songshan (Taiwan) according to The Aviation Herald. CI202 is a five times weekly flight that normally departs Shanghai at 16:15 local time and arrives at Taipei around 18:15. An interesting thing about this flight is that in the past week, it seems to have switched back and forth between Shanghai Pudong and Shanghai Hongqiao.

On June 14th, the A330 touched down on Songshan's wet runway 10. Upon touchdown, the Aviation Herald reports that all three primary flight computers, thrust reversers, and autobrake systems failed. This affected the stopping distance of the aircraft.

In response, the crew applied maximum manual braking, managing to stop the aircraft just 10 meters (or 33 feet) before the end of the runway. The total runway length was 2600 meters.

After it was able to just barely perform a safe stop, the aircraft was towed to the apron where it remained on the ground until June 23rd. On the 23rd it was repositioned to Taipei Taoyuan International Airport. Since its repositioning flight to the larger Taoyuan airport, the A330 has remained on the ground.

Investigation underway
Taiwan's Civil Aviation Authority (CAA) has reported that the root cause of the occurrence is still under investigation. As such, it advises all A330 operators to take the following countermeasures:

• Prior to dispatch, consider possible deceleration deficiencies with the conditions mentioned above on wet runways.
• Required landing distance shall be predetermined for a wet runway. If the distance is a concern, consider an alternate aerodrome.
• Operators should enhance crew awareness of wet runway operations. If automatic braking is out of function, promptly change to the alternate system or apply manual braking